Great little light strips
During my shop expansion project, I needed some under shelf lighting. I looked at several that were available, and settled on the ASOKO brand. I had not used these particular lights, but they seemed like exactly what I needed. I purchased 1 of the 24″ variety and installed them with the small metal adhesive brackets for the magnets in the strips. I wanted to try one first to see how they work and how well they illuminate the area. It worked out very nicely.A couple things I based my purchase on were; (1) the 3 available and switchable color temps, (2) the multiple mounting options, and (3) their very narrow form-factor that made them more easily to hide. I ended up stapling a piece of door-stop molding to the front of my shelf to help a bit.After deciding to keep the light strip, I purchased 2 of the 14.5″ variety, as they were the perfect length for what I needed. I installed them with the brackets and have been very happy with these LED light strips. They come with a small USB power adapter and very pliable and soft cord. Since I liked these so much, I recently purchased a 2-pack. Great value for the money.

Thin and function, perfect for the space, but …
This light is thin, light, and functional for what I needed. So far it’s great, the light it gives is fine, it seems to work reliably.But I would have preferred two changes: 1) the cord is WAY too short (could use at least another foot), and 2) would prefer the control on/near the light itself. As it is the control is almost at the plug.Other than that, I like it a lot.

Great little product and features – just find another adhesive.
I actually really LOVE this little light, it’s EXACTLY the kind of thing I was looking for.I needed a little bar light to go underneath the cabinets above my monitors, something unobtrusive, and this really fits the bill.The fact that it is removable and portable is a nice little feature, though I doubt I’ll use that feature for my current needs.The three different light colors/warmths, AND the fact that it is dimmable to a great extent are PERFECT for my needs. I needed light directly on my workspace and in front of my monitors, bright enough to light my desk specifically in an otherwise light room, but I also occasionally like to work at night, and don’t like to advertise the fact that I’m here, and this little light is perfect to light my workspace without shedding a lot of light elsewhere. I can now work in the dark, yet still see what I’m doing, and dim the light to whatever level I need.The switch being about a third of the way down the cord is also perfect. I’ve attached it to the sidewall of my desk with the included clip (used the other one to clip the cord out of the way down the outside of the desk). I appreciate that it is NOT on the light bar itself – it’s out of the way, but within reach, and I’m not constantly fiddling with the light bar, potentially causing problems with its placement or attachments. The cord is the perfect length for the light bar to be centered over my workspace, and the cord to drape behind the monitors, down the side of the desk, and wrap around to the front of my computer tower to plug into a USB port. (If I wanted to use the included wall plug, it might have *just* been long enough – but I might also have wanted an extension cord of sorts.)The two different styles of magnetic ‘clips’ are a great idea – you can use and place it in a variety of angles or configurations quite easily. I only needed the L-clips, but if I were using it strictly on a flat surface, the discs could be useful.The one caveat is that, yeah, the 3M adhesive foam bits are pretty crap. The first one, when I pulled off the backing, the actual sticky part came with it – so it was clear that piece was going to fail. The other one failed an hour later as well, and that was after leaving the adhesive to adhere without the weight of the bar for that hour. (And the bar itself is quite lightweight.) So – find yourself a different, better adhesive, and you’ll be set. Probably either some genuine 3M Command strips, or those Command ‘plastic velcro’ bits, if you want something that’s easily stickable/removable.I simply used a couple of strips of heavyweight Scotch “book tape” that I had laying around and I know to be very sticky to strap the L-clips to the backside of the cabinet edge – it’s functional, and can’t be seen.One more thing – it wasn’t immediately obvious to me where the actual ‘magnets’ are in the strip. They are located ONLY at the ENDS of the light bar. Attach the magnets, THEN whatever you’re using to stick the metal pieces to your location, and either mark the ends, or position the whole thing in place.

Soft and dim
Not very bright and while the light has two different settings, it is not very functional

Installed in basement for extra light, great light for my purpose, it is above some shelving on an angle and does great job lighting that area, magnetic feature made it easy to mount.Would buy again.Power cord is about 5 feet, which is excellent since I have it on the ceiling.On/off switch is about 3 feet down the cord from the light and 2 feet from the plug which again worked well for my applicationI have a flashlight that’s 500 Lumens, I compared it to the brightness of this light and they appear to light the area the same (wide beam flashlight)Brightness is adjustable as well as light temperature – which is easy to adjust and functions excellentGood qualityRecommend this light if it suits your needs

Bought the ASOKO LED Under Cabinet Lighting USB Plug-in, Dimmable, 3 Color Changing(2700K, 4000K,6000K), 14.5 in, Under Counter Lights for Kitchen, Shelf, Cupboard, Under Desk Light, lumière d’armoire versionBought date: November 3rd 2023Time of writing: November 5th 2023—The Good* Maximum brightness setting is surprisingly bright for a such a small unit* Good adhesion solutions: Double sided adhesive tape to use with metallic L brackets and the actual unit which is magnetic. Note: The photos on the listing showed adhesive circular magnets that you attach onto the unit but I think that’s an old version so that’s not part of the product anymore.* Used it as a bedside lamp and my bedframe is magnetic. The strength of the magnet is super strong* It has 3 distinctive colour modes. White light (6000k), Daylight white (4500k), Warm white (2700k)* It has 10 brightness levels. Maximum brightness is super bright. Bright enough to be used as a temporary night light. Not bright enough to be used as a desk light.* Cord is long and the switches are easy to press* Common USB A (regular rectangular USB jack) used to power. Note: It doesn’t have a battery so you always have to plug it in* They provide an adapter for the usb cable* They provide two adhesive cable management clips* The controls are super simple. Very easy to remember/learn* When plugged in, there’s a very faint red light on the controller to indicate it’s plugged in. Great for finding the location of the controller in the dark.* Can be used in conjunction with a smart plug for turning it on/off! I don’t use smart plugs but might be a pretty good idea.”Alexa, turn on the cabinet lights”–The Bad* Cable does not unplug from the main unit* Only the side opposite from the light is magnetized.–Conclusion: Recommended for a very quick and simple temporary light for small to medium sized spaces! It doesn’t have a motion detection feature but it’s not built for that. Great for cabinets, bedside lamps, and more. Even better for smaller and enclosed spaces because you’ll be able to utilize the maximum brightness setting the best.

This light is very compact and has anti glare qualities.