Price: $24.99
(as of Sep 10, 2024 17:30:25 UTC – Details)
Product Description
COB Led Strip Light Kit Tatazone
Soft glow light for your room(Not support Battery Powered).
Brightness of 24W=36W Energy Saving
130lm/w high lumen output illuminate your entire room, perfect for living room, bedroom, kitchen, cabinet, shelf, closet, desk, frame, curtain.
Safe to use Operating on 24V Certified Power Supply
Came with US safety standards and regulations power supply, comply with safe radiation standards.
Set timer to turn off led cob strip automatically 
Pairing the Remote with Dimmer
One remote to control all this tatazone COB led strip kit, or pairing remote for controlling one.
8.2ft Wire From Adapter to Led COB Strip
Extended the cable length of dimmer makes your installation without limits, use button control easy.
1920 Led’s Spread over the COB Light
High density of led’s covered silicone material makes the light soft and uniform.
1 Concern Safety
2 Timer
3 Pairing Mode
4 Ultra Long Wire
5 High Density Led Strip
Know more about the RF remote
· How to solve the light strip turn on randomly? Pair the remote to the dimmer, problem will solve.
· Wireless control via RF remote, no needs to point at the controller when you control the COB light strip.
· The RF signal can pass through obstacles compare to IR remote.
· Multiple functions: timer setting, adjust brightness 10-100%, scenes option, pairing mode.
· Sensing Distance: 49.2ft.
Warning: DO NOT ROLL UP THE LIGHT STRIP WHEN USING, spread out the led strip before connect the power supply.
If the light strip roll up when lighting up, the light strip unable to dissipate heat.
How to make the adhesive tape more sticky?
1. Do not stick to dusty wall, rough plastic surface, frosted glass, knitted/wool fabrics.
2. Choose a dry,clean and smooth surface.
3. In low-temperature environments, please use a hair dryer to warm up the tape.
Does the light strip could be memorized last setting after turned off the light?
Yes, the cob led will remember your setting when COB led powered off.
How to solve the light strip turn on and off randomly, or dimming on it’s own, randomly flashing?
The problem came with other remote control signal interference, hold the 10% and 50% button at the same time for 3s, and then release the button, the light will flash, the problem solved.
Technical Data of COB Led Strip
Voltage 24 Vdc Power Rated 24W Color Temperature 3000K-Warm White Led Quantity 384 LEDs/m-1920pcs/16.4ft Light Efficiency 3120lm/16.4ft-130 lm/w CRI ＞88+ SDCM ≤6 IP Level 50 Cutting Size 1.65in/42mm Length of Light Strip 1*16.4ft/5m Width 0.31in/8mm (Matching 8mm 2 PIN COB connector) Included 1 x 16.4ft/5m COB Strip Light 、1 x 24V Power Supply、1 x Dimmer 、1 x User Munual、RF Rmote Battery Powered Not Support
Tatazone Led COB Strip Light Kit
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.3 out of 5 stars
196
4.2 out of 5 stars
91
4.6 out of 5 stars
64
3.7 out of 5 stars
55
4.1 out of 5 stars
48
3.9 out of 5 stars
108
3.7 out of 5 stars
58
Price
$47.99$47.99
$36.99$36.99
$25.99$25.99
$49.99$49.99
$51.99$51.99
$9.99$9.99
$25.99$25.99
Length
16.4ft
16.4ft
16.4ft
16.4ft
16.4ft
4.92ft
16.4ft
Wi-Fi
√
√
×
√
√
×
×
Control Methods
App / Remote / Button / Voice
App / Remote / Button / Voice
RF Remote / Button
App / Remote / Button / Voice
App / Remote / Button / Voice
RF Remote / Button
RF Remote / Button
Alexa and Google Compatible
√
√
×
√
√
×
×
Protective Coating
√
√
√
√
√
√
√
Ultra Bright Uniform light: Special technology rises the lumens efficiency up to 130lm/w makes the brightness 24W=36W, the diodes cover yellow odorless and safe silicone material makes light strips more uniform and bright, not shine your eye.
Create Linear Effect：Came with 1920 pcs diodes/16.4ft light strip, no more light dark areas, not reflected off the dark tile or polished counter, great for cosplay effects and model makers.
Easy to DIY: Flexible and cuttable COB light strip with strong adhesive tape, and 8.2ft wire lead from power supply to light strip, makes easy to bend angle to install and decorate (Do not stick on frosted glass, dusty wall, rough plastic surface, wool fabrics).
Dimmable: The COB rope light adjust 10-100% brightness makes room more Inviting.
Widely Used: The COB strip light is great ideal for vanity mirror, stair, bedroom, cabinet, kitchen counters, living room, display case.
Multiple Functions: Power on last setting, adjust brightness, timer setting, scenes options.
How to solve the light strip auto turn on or turn off: Pair the remote with controller, hold the 10% and 50% button at the same time for 3s, and then release the button, the light strip will flash, sucessful.
Additional Information
| ASIN | B09TDYKCBY |
|---|---|
| Customer Reviews |
4.4 out of 5 stars |
| Best Sellers Rank | #3,391 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #55 in LED Strip Lights |
| Date First Available | April 23, 2022 |
Warranty & Support
Customers say
Customers like the brightness, functionality, and ease of installation of the string lights. They mention that it provides great lighting, the remote works well, and the product looks great. Some also like the brightness settings. However, some customers are disappointed with the light switch and have mixed opinions on the adhesion and durability.
AI-generated from the text of customer reviews
Destany & Mil –
Exactly as advertised
 I love this light strip because theres no gaps in between the lights. It’s also cool toned and white. No warmth at all. It has a remote that reaches pretty far even with my small plant blocking the receiver. It comes with 3M already on the back of the light strip so all you have to do is remove the paper and stick. It has a very strong hold so once you put it on its hard to take off. The power cable is long and white so you should have no problems with length. You can cut it to your desired length. There are various modes and brightness levels. You can also put it on a timer and adjust the brightness yourself or use the preset buttons. It is the perfect mood light. It’s also great quality and doesn’t add any unnecessary heat. I highly recommend this light strip
Mark White –
Exceptional Light Strip!
If I could give this product 10 stars I would!This lighting strip is amazing! I installed it to run vertical….from the floor to the ceiling along a 12′ corner in an open room. The effect is spectacular! The color temperature of the lighting is perfect….bright white and not yellow.This light strip creates more visual impact and interest than other light fixutres I have purchased for much much more in cost. “Big bang for the buck”!The installation is incredibly easy; if you don’t need the entire length of the strip you can cut it into a shorter length.For the money this is a fabulous purchase and I likely will be getting another one(s).
Tyler Rubner –
Perfect and just right for the price..!
I recently purchased this LED light strip, and I couldn’t be happier with my purchase! The brightness of this light strip is absolutely fantastic; it illuminates my room with a vibrant glow that instantly transforms the ambiance.One of the standout features of this LED light strip is the variety of settings it offers. Whether I’m looking for a calming, soft glow or a dynamic, colorful display, this light strip has it all. The ability to customize the lighting to suit my mood or the occasion is a game-changer.But what I love most about this LED light strip is how beautifully it lights up my collection of Godzilla and other figures. The colors are so vivid and the brightness is just right, highlighting the intricate details of each figure in a way that truly brings them to life.Overall, I highly recommend this LED light strip to anyone looking to add some excitement and ambiance to their space. With its incredible brightness, versatile settings, and ability to enhance the display of collectibles, it’s truly a must-have accessory.
Mariam –
Genius.
I used this led strip because I don’t have any ceiling lights in my bedroom. I stuck it on the edges of my wall on the top and it LIGHTS UP the whole room you wouldn’t even believe that it’s not a ceiling light! I also love that it has different dim settings. The only issue I’m having is when I do the 10% dim the light sometimes flickers for a while before it’s stable again.
Logan Rogers-Follis –
Great LED lights
Everything I wanted for our pantry lights was found here in this product. I needed an on/off switch in-line and I only wanted a “white” light instead of color. This even comes with an RF controller which is optional and no “IoT” junk.
REB07 –
3 year warranty and easy to install on TV
Step 1. Designed layout. Thought about where I wanted the power switch to be and how the power cable would run. Looked at back of TV and decided the best place to run the LED lights. Given the design of the back of my TV, a little more than three inches from each side seemed about right.Step 2. Used painter’s tape to mark corners and straight lines where LED lights would be applied.Step 3. Cleaned area with rubbing alcohol and let it dry for a few minutes.Step 4. Removed backing from LED strip to expose adhesive and gently applied an area at a time, making sure it was straight. Adhesive is strong so it’s important to get it right before pressing hard to make it stick permanently.Step 5. Connected switch and power cable.Step 6. Pressed “On” and beheld the miracle of light!16.4 feet was plenty long for my 65″ Hisense TV. After finishing installation, including loops at corners to reduce strain on lights, there was about 10″ left — which was easy to cut off.I measured watts used by the AC/DC converter when LED lights are off. I was concerned it might be a costly hidden energy drain. I was relieved to see that it uses 0.4 Watts when turned off, which only costs about 5 cents per month at 16 cents/kWh.Description on Amazon says 3 year warranty, but box said 1 year warranty. I received quick response from seller that warranty really is for 3 years.I read online somewhere that 6500K is ideal for bias lighting (backlighting) for TV. I’m not sure of the technical reasons for this — something to do with how HDTVs are typically calibrated — but this light “feels good” to my eyes as a backlight. We have light grey walls.In a dark room, I usually use the lights at 25% to 50%. I have been pleased with the results.
LARRY P –
I loved it, then they stopped working
Iâm not sure what happened, they were great and then they went down to the lowest setting and wouldnât get lighter. I unplugged it and put it in a different outlet but nothing changed. Itâs just stuck at low and now the remote isnât really responsive like it used to be. If I hold down the brightest setting (100%) it will go bright but when I let go it falls back down to the darkness setting, so I know itâs not the remote. I was just about to buy another set for my guest bedroom but now after it only being a month of having it and it stopped working Iâm not sure itâs worth ordering again. My return window just closed on the 28th of March and I hadnât used them right when I got them so they have only been used in the evening for less than 30 daysSo for the price and longevity I canât recommend this brand.Bummer because they were cool and kinda tedious to put up mostly because of the hard to reach areas. I wonder if they would send me a replacement set?
Jessica Huddleston –
Nice and bright
These are the best Iâve ever bought. They are very bright and also dim down nicely!